removing sludge from oil tank

Crude Oil Sludge Treatment Plant

Crude oil sludge treatment plant t has applied the new anaerobic heating technology, which can make the molecule of oily sludge pyrolyse and recombine. After the advanced oil sludge treatment process, we can get the fuel oil with high combustion value. In addition, Beston oil sludge recycling plant has the large area to heat exchange in the condenser system, which can efficiently increase the cooling efficiency and output rate of products. The whole pyrolysis system is sealed, which ensures the environmental production and economic.

Crude Oil Sludge Treatment Plant
Beston Crude Oil Sludge Treatment Plant Installed in Nigeria

Heating fuel of crude oil sludge treatment recycling plant

Generally, we use the oil, LPG, natural gas, wood and the coal as the fuel. All of these material have high combustion value to increase the pyrolysis efficiency, and beyond that, the generated tail gas will be thoroughly purified through the dedusting system with four filters. The gas can be recycled for heating the reactor as fuel material. So in short, our oil sludge pyrolysis machine can meet the national emission standard, and it is quite environmental and economic.

Final products in the crude oil sludge treatment process

There are three end products generated in the process of oil sludge pyrolysis: fuel oil, solid and water, accounting for 12.5%, 72.5% and 15% respectively. These products have a wide range of applications, for example, the fuel oil can be sold directly, because it can be used as the fuel oil in some industries, or it can be reprocessed into diesel which has higher value and wider applications through the distillation plant. As for the water, it is more useful and precious in our daily life. As we all know that the water resource is becoming scarcer in our country, so the water is very crucial for us. Besides, in the process of pyrolysis, we will always use water for circling and cooling. Under this circumstance, our machine can not only save the water resource but fully achieve the self support. The solid can be used for making bricks or other building materials.

Reasons to choose the crude oil sludge recycling plants from Beston Group

Firstly, the security

The introduction of the automatic weld and the X-ray inspection weld will provide our clients with high-quality machines. There are thermodetector and safety valves equipped in each reactor, which is continent for customers to operate the machine safely and simply.

Secondly, environmental production

The new designed dedusting system can eliminate the tail gas efficiently, which can meet the emission standard and achieve the green production. The recycling water doesn’t contact the oil directly, which is both environmental and economy.

crude oil sludge pyrolysis
Crude oil sludge pyrolysis equipment

Thirdly, long service life

The raw material of the reactor is the stainless steel boiler plate material; welding: the introduction of the automatic weld and X-ray inspection weld extend the using life of reactor for 6to 7years; reactor heated indirectly can make the reactor heated uniformly, which can also extend the using time of the reactor.

Finally, saving energy

The heating system must have been sealed to prevent the gas leaking and save the energy; the extra gas can be recycled into the reactor, and heated in vacuum to produce the powerful negative pressure. Under this circumstance, the oil sludge molecule will pyrolyse quickly and reduce energy.

removing sludge from oil tank
Extracting oil from crude oil sludge

Besides, the pyrolysis plant price is quite reasonable, and we can provide you with detailed cost analysis report. Contact us now!

Model BLJ-6 BLJ-10 BLJ-16 BLL-20
Daily Capacity 6T 8T-10T 15-20T 20-24T
Working Method Batch Semi-Continuous Fully Continuous
Raw Materials Waste Tyre, Rubber, Plastic, Oil Sludge
Reactor Size D2.2*L6.0m D2.6*L6.6m D2.8*L7.1m D1.4*L11m
Pattern Horizontal & Rotary
Heating Materials Charcoal, Wood, Fuel Oil, Natural Gas, LPG, etc.
Total Power 24kw/h 30kw/h 54kw/h 71.4kw/h
Floor Area (L*W*H) 30*10*8m 30*10*8m 40*10*8m 45*25*10m
Operating Pressure Normal Pressure Constant Pressure
Cooling Method Water Cooling
Life Span 5-8 Years

    Please feel free to give your inquiry in the form below. We will reply in 24 hours.

    Name (required)
    E-mail (required)
    Phone (required)