What’s the difference between continuous pyrolysis plant and intermittent pyrolysis plant?

In order to satisfy various different customers’ requirement, we have manufactured the pyrolysis equipment into three types: batch, semi-continuous, fully continuous.

They are different in the following aspects:

1. For the continuous type, the feeding of raw materials and discharging of slag are both automatic. While for the intermittent type, these two processes are manual.

2. For the continuous type, the feeding hole is very small, so the pretreating system is needed to cut the raw materials into small piece. While the intermittent type does not need this device.

3. The continuous plant can operate for some time without stop. While for the intermittent plant, the reactor must be cooled before the second batch.

4. The reactors of continuous plant and batch plant are quite different.

Basic Parameter:

Model BLJ-6 BLJ-10 BLJ-16 BLL-20
Daily Capacity 6T 8T-10T 15-20T 20-24T
Working Method Batch Semi-Continuous Fully Continuous
Raw Materials Waste Tyre, Rubber, Plastic, Oil Sludge
Reactor Size D2.2*L6.0m D2.6*L6.6m D2.8*L7.1m D1.4*L11m
Pattern Horizontal & Rotary
Heating Materials Charcoal, Wood, Fuel Oil, Natural Gas, LPG, etc.
Total Power 24kw/h 30kw/h 54kw/h 71.4kw/h
Floor Area (L*W*H) 30*10*8m 30*10*8m 40*10*8m 45*25*10m
Operating Pressure Normal Pressure Constant Pressure
Cooling Method Water Cooling
Life Span 5-8 Years

    Please feel free to give your inquiry in the form below. We will reply in 24 hours.

    Name (required)
    E-mail (required)
    Phone (required)
    Country
    Company
    Message